Trigger Board Module PD/QC Decoy Board Fast Charging Test Board USB Type-c High Speed Charger Power Delivery Boost Module

This USB-C PD/QC trigger board is used to request fixed fast-charge output voltages from compatible USB-C chargers or power modules. It is useful for power testing, repair bench checks, prototype power input testing, and quick validation of PD/QC output behavior.

Key Uses

• Triggering common PD/QC output voltages for electronics test work.
• Checking whether a charger, cable, or power module can provide the required voltage.
• Supplying prototype boards or repair bench loads within the listed electrical ratings.

Specifications and Compatibility Notes

• Module type: USB-C PD/QC trigger board
• Typical use: fast-charge power output testing, electronics prototyping, and bench repair work
• Voltage selection: 5V, 9V, 12V, 15V, and 20V when supported by the connected charger or power source
• Supported protocols listed by supplier: USB PD, QC, and BC1.2 fast-charge negotiation
• Interface: USB Type-C input/output pass-through board
• Listed current rating: up to 5A; actual usable current depends on the power source, cable, wiring, and load
• For 100W use, a compatible PD source and suitable e-marker cable are required
• Available configurations include single or two-piece sets, with terminal or without terminal depending on selected variant
• This module supports PD/QC protocol and supports up to 100W power.
• The voltage can be adjusted freely through the DIP switch, 5V/9V/12V/15V/20V is adjustable, and the voltage output voltage is up to 20V.
• It can automatically lower the voltage according to the power supply voltage output capability.
• High current, multi-protocol, anti-static protection.
• It can pass 5A current. The actual output current is determined by the power supply and the load. The input and output use a pass-through connection.
• Interface: USB Type-C
• Input: 4-21V
• Protocol: supports PD and QC protocol negotiation (PD priority)
• Voltage: supports 5V/9V/12V/15V/20V output selection
• Current: 5A (maximum)
• Power: supports up to 100W when used with a compatible e-marker charging cable
• According to the power source capability, the requested voltage may automatically fall back to an available output. For example, if 20V is selected but the connected PD power source supports only up to 12V, the board may request the available 12V output.
• 5A current can pass through the line. The actual output current is determined by your power supply and load. The input and output use a pass-through connection.
• Set the DIP switch according to the voltage table printed on the board.
• For example, to select 9V, set the switch near the USB-C port according to the board marking.
• Supports up to 100W when used with a compatible e-marker charging cable

Variant Selection

Select the configuration that matches your build: with terminal, without terminal, one-piece, or two-piece pack. The option name has been set as configuration because these variants are not color choices.

Package Includes

PD/QC trigger board module in the selected configuration. Accessories and terminal blocks depend on the selected variant.

Use Notes

• Confirm voltage selection before connecting a load.
• Use within the listed voltage/current ratings and normal electrical safety limits.
• If the connected charger does not support the selected voltage, output behavior may fall back or fail to trigger.

Product Detail Images