Spring Steel Flexible Build Plate For Anycubic Photon M7 Pro M5 M5S M3 Plus Max Mono 4 Ultra X SE 4K 6K 6KS X2
We are professional manufacturer for Spring Steel Flexible Build Plate Sheet Magnetic Base. For more models please contact with us.
Full size for Anycubic 3D Printer
Choose correct size for your machine
163x90mm Build Plate for Anycubic
Mono 4
Mono 4 Ultra
135x80mm Build Plate for Anycubic
Photon S
Photon Mono
Photon Mono SE
Photon Mono 4K
138x78mm Build Plate for Anycubic
Photon D2
160x95mm Build Plate for Anycubic
Photon Mono 2
172x110mm Build Plate for Anycubic
Photon M3
202x128mm Build Plate for Anycubic
Photon Mono X
Photon Mono X 6K
Photon Mono X 6Ks
Photon Mono X2
Photon M3 Plus
228x131mm Build Plate for Anycubic
Photon M7
Photon M7 Pro
230x135mm Build Plate for Anycubic
Photon M5
Photon M5s
Photon M5s Pro
310x174mm Build Plate for Anycubic
Photon M3 Max
EASY TO REMOVE PRINTS
The spring steel sheet could be bent and returned to a flat state quickly. So that it can release models easily without any tools. And no damages for the models or the building bed.
Tips
Before installation, please make sure that the platform is clean and dry before attaching a soft magnetic surface.
Magnetic Steel Plate for Anycubic Photon Mono
The soft magnetic surface must be tightly attached. If it is not tightly attached, leaving a gap will cause the resin to soak into the adhesive, leading to loss of viscosity.
Please print after 24 hours after installation
HOW TO INSTALL
Before installation, please clean the build plate and make it keeps clean and dry.
1. Simply align the magnetic sticker
2. Remove the paper backing from the back
3. Attach the magnet to the build plate
4. Once you have finished printing, remove the stainless steel plate, flex the print off
5. Snap the steel plate back onto the magnetic sheet.
Prints are easily removed without any scratches or damage.
What's in it
1x Spring Steel Plate
1x Magnetic 3M Base
