ACF FEP NFEP Film
2pcs ACF FEP NFEP Film for Creality Halot ANYCUBIC Photon Mono Phrozen Elegoo Mars Saturn 3 4 UV Resin LCD 3D Printer Release Film
How to Choose
Use the following guidance to select the film type.
If your original machine comes with ACF film, then we recommand ACF film, becuase it supports high speed printing.
If your original machine comes with NFEP film, then we recommand NFEP or ACF film, they can provide better printing effect.
If your original machine comes with FEP film, you can choose an economical FEP film, or for better printing accuracy and results, we recommend choosing NFEP or ACF film
The comparison of their characteristics as following:
Advantages of nFEP Film
nFEP film also known as FPA film. It is more flexible and has better adhesion resistance. This just makes your prints better, since it won't stick to the film thus avoiding support's breakage, which means a higher success rate and longer life span.
Notice: Please remember to re-leveling your 3D printer once change FEP film to nFEP film, as they are different thickness.
Tips for How to Reduce Adhesion
Please add supports evenly, because no matter what kind of release film it is, it has a certain adhesion, so every slight shaking when pulling up and down will cause the model to be uneven or mis-layered, so add supports evenly can reduce the shaking of the model and obtain a more perfect print.
Advantages of ACF Film
ACF film is specially designed for high-speed resin printing. The use of ACF release film with high-speed resin allows machine to achieve high-speed resin printing, ensuring printing reliability and providing a smoother printing experience.
Notice: If your 3D printer has low performance, we do not recommend ACF film as it may not achieve the desired effect.
Compatibility
There are several sizes available, suitable most of 3D printers, like for Anycubic Elegoo, Creality, Phrozen, etc. Please check following list.
Other Models
If your machine is not included in above lists, please contact with us, or you can measure the size of your resin vat/tank, be sure the size of the release film is slightly larger than the size of the resin tank, then it can also fit your 3D printer.
Ideal Replacement
It is a good replacement for your 3D printer release film.
Upgraded Package
Both sides of each film will be covered with transparent protective film. And re-packed in bubble envelope bag (for small size 200x140mm), other larger size will be packed in hard tube, make sure arrived in good condition.
To Protect Release Film
1. After each printing failure, the impurities in the material tank must be cleaned in time, otherwise it may cause another printing failure or even damage the film or LCD screen.
2. Do not use hard plastic scraper to clean the resin vat, if possible, soft scraper is better. (You can find it in our store).
Tips for Cleaning: Use the printer's built-in cleaning function, or manually expose the bottom layer for 10-30 seconds, then lift and remove the entire cured bottom layer to remove impurities more efficiently.
