3D Printer Release Film
2pcs/5pcs NFEP Release Film for Elegoo Mars 2 3 4 Max Pro DLP Saturn S 2 3 Ultra 4K 8K 12K UV Resin 3D Printer FEP Release Film
200mm*140mm
Suitable for Elegoo Mars, Elegoo Mars Pro, Elegoo Mars 2, Elegoo Mars 3 (4K), Elegoo 3 Pro (4K) 3D Printer.
260mm*200mm
Suitable for Elegoo Mars 4 (9K), Elegoo Mars 4 Max (6K), Elegoo Mars 4 DLP, Elegoo Mars 4 Ultra (9K),, Elegoo Saturn S (4K) Resin 3D Printer
290mm*210mm
Suitable for Elegoo Saturn (8K), Elegoo Saturn 2 (8K), Elegoo Saturn 3 (12K), Elegoo Saturn 3/4 Ultra (12K) SLA 3D Printer.
Other Models
If your 3D Printer is not included in above form, then you can measure the size of your resin vat/tank, be sure the size of the release film is slightly larger than the size of the resin tank, then it can also fit your 3D printer.
How to Choose - nFEP or FEP?
When your prints are relatively simple and printing is not frequent, please choose traditional FEP film, because it can meet those basic needs and it is cheaper. But if you print more frequently, the prints are more complex, or you want to obtain more precise printing effects, then nFEP will be more suitable for you. Because nFEP release film with following advantages.
Better Adhesion Resistance
nFEP film also known as FPA film. It is more flexible and has better adhesion resistance. This just makes your prints better, since it won't stick to the film thus avoiding support's breakage, which means a higher success rate and longer life span.
Notice: Please remember to re-leveling your 3D printer once change FEP film to nFEP film, as they are different thickness.
Tips for How to Reduce Adhesion
Please add supports evenly, because no matter what kind of release film it is, it has a certain adhesion, so every slight shaking when pulling up and down will cause the model to be uneven or mis-layered, so add supports evenly can reduce the shaking of the model and obtain a more perfect print.
Ideal Replacement
It is a good replacement for your 3D printer release film.
Cleaning
After each printing failure, the impurities in the material tank must be cleaned in time, otherwise it may cause another printing failure or even damage the release film or LCD screen.
Tips for Cleaning: Use the printer's built-in cleaning function, or manually expose the bottom layer for 10-30 seconds, then lift and remove the entire cured bottom layer to remove impurities more efficiently.
Soft Scraper
Our this professional scraper is made of soft and smooth material, easy to scrape off residual resin without damaging the film. DO NOT USE hard plastic scraper, it will damage the film even LCD screen.
Package
Both sides of each film will be covered with transparent protective film. And re-packed in hardpaper envelope bag, make sure arrived in good condition.
Works Display
