Kattintson duplán a képre a nagyításhoz
Kattintson a képre a kibontott nézet megnyitásához
Termékösszefoglaló
ESP32-S3 1.69-inch IPS Touch LCD kijelző fejlesztőpanel 240x280 ST7789V2 SPI kijelző is a fejlesztőpanel selected for building connected devices, firmware tests and rapid electronics prototypes. Alkalmas a következőkhöz makers, embedded developers and IoT prototyping teams akiknek megbízható projektekhez praktikus elektronikai hardverre van szükségük.
Ideális ezekhez
- building connected devices, firmware tests and rapid electronics prototypes
- Arduino, MicroPython, sensors, displays and expansion modules
- elektronikai teszteléshez, javításhoz, prototípus-készítéshez és maker munkafolyamatokhoz
GYIK
Kinek szól ez a termék? Ez a termék a következőknek készült makers, embedded developers and IoT prototyping teams.
Mit ellenőrizzek vásárlás előtt? Tekintse meg ezen az oldalon a termékváltozatokat, műszaki adatokat, a csomag tartalmát és a kompatibilitási részleteket.
Product Introduction:
The ESP32-S3-Touch-LCD-1.69 is a low-cost, high-performance microcontroller fejlesztőpanel. Despite its compact size, it integrates a 1.69-inch capacitive LCD screen, a lithium battery charging chip, a six-axis sensor (three-axis accelerometer and three-axis gyroscope), a real-time clock (RTC), and other peripherals, facilitating development and product integration for developers. The ESP32-S3 currently supports two development tools and frameworks: Arduino IDE and ESP-IDF, providing flexible development options. You can choose the appropriate development tool based on your project requirements and personal preferences.
Product Features
Equipped with a high-performance Xtensa® 32-bit LX7 dual-core processor with a clock speed of up to 240 MHz
Supports 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth® 5 (LE), with an onboard antenna
Built-in 512KB SRAM and 384KB ROM, stacked with 8MB PSRAM and external 16MB Flash
Onboard 1.69-inch capacitive LCD screen with 240x280 resolution and 262K colors, capable of clearly displaying color images
Integrated QMI8658 six-axis IMU and PCF85063 RTC, supporting motion detection and RTC functions
LCD and its Controller
The LCD uses the built-in ST7789V2 controller, a 240 x RGB x 320 pixel LCD controller. However, the LCD itself has a resolution of 240(H) x RGB x 280(V), so the internal RAM of the LCD is not fully utilized.
The LCD supports 12-bit, 16-bit, and 18-bit per pixel input color formats, namely RGB444, RGB565, and RGB666.
The LCD uses a four-wire SPI communication interface, which greatly saves GPIO pins and provides faster communication speeds.
The modul resolution is 240(H) x RGB x 280(V), but because the corners are rounded (see parameters for dimensions), some parts of the input image may not be displayed.
Product List:
1 x fejlesztőpanel (Touch and non-touch versions are available
