Kattintson duplán a képre a nagyításhoz
Kattintson a képre a kibontott nézet megnyitásához
Termékösszefoglaló
DIY particle counter készlet With Audible Alarm Miller Tube ionizing particle Detector panel is a electronics product selected for electronics repair, testing, prototyping and project work. Alkalmas a következőkhöz electronics users, repair technicians and maker project builders akiknek megbízható projektekhez praktikus elektronikai hardverre van szükségük.
Ideális ezekhez
- electronics repair, testing, prototyping and project work
- bench electronics, DIY projects and maker workflows
- elektronikai teszteléshez, javításhoz, prototípus-készítéshez és maker munkafolyamatokhoz
GYIK
Kinek szól ez a termék? Ez a termék a következőknek készült electronics users, repair technicians and maker project builders.
Mit ellenőrizzek vásárlás előtt? Tekintse meg ezen az oldalon a termékváltozatokat, műszaki adatokat, a csomag tartalmát és a kompatibilitási részleteket.
DIY részecskeszámláló Kit Autable Alarm Miller Tube ionizáló részecskeérzékelő tábla könnyen használható
1. Enhanced Alerting System: The sound and light alarm of miller tube ionizing particle detector panel feature provides better reminders and enhances the overall user experience.The NE555 integrated circuit and peripheral electronic components form an oscillator , which transfers power to a diode multiplier circuit through inductive energy storage.The end of the multiplier circuit can output a high voltage of 400 volts for particle-Muller counters.
2. Wide Range of Applications: This assembled diy particle counter készlet can detect X-rays, gamma rays, and beta rays. It is also suitable for measuring particle levels in marble, antiques, iodine-131, and various unknown minerals.
3. Compatibility with Most particle-Muller Tubes: Direct installation possible for M4011 tube. For other models, use jumper wires to connect (adjust the blue potentiometer until the multimeter displays a DC 170V by measuring the positive pole of the particle-Muller tube to the negative pole of the tápegység with a digitális multimeter).
4. External Monitor Support: Allows monitoring through an external screen or pointer-type instrument. The output signal of particle counter circuit panel készlet is an interrupt output with a waveform waveform on the falling edge, effective at low voltage.
5. Stable Circuit Structure : The circuit structure of diy particle counter circuit panel parts ensures stability and reliability, resulting in an extremely low failure rate. It meets the daily requirements perfectly.
particle Tube Model: M4011
Type C interface tápegység: 5V1A
Power consumption current: 20mA
Tube M4011 Specifications:
Diameter: 10±0.5mm
Total length: 90±2mm
Starting voltage: Less than 350V
Recommended working voltage: 380V
Minimum ping length: 80V
Maximum ping slope: 10%/80V
Extreme working voltage: 550V
Maximum background countrate: 25 counts/minute
Lifespan: Greater than 1x109 waveform
Detection:X-ray Beta Gamma rays
Colour:Photo Color
Material:plastic
Package Contents:
1 x ionizing particle Detector panel Set (DIY Version)
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
2. Wide Range of Applications: This assembled diy particle counter készlet can detect X-rays, gamma rays, and beta rays. It is also suitable for measuring particle levels in marble, antiques, iodine-131, and various unknown minerals.
3. Compatibility with Most particle-Muller Tubes: Direct installation possible for M4011 tube. For other models, use jumper wires to connect (adjust the blue potentiometer until the multimeter displays a DC 170V by measuring the positive pole of the particle-Muller tube to the negative pole of the tápegység with a digitális multimeter).
4. External Monitor Support: Allows monitoring through an external screen or pointer-type instrument. The output signal of particle counter circuit panel készlet is an interrupt output with a waveform waveform on the falling edge, effective at low voltage.
5. Stable Circuit Structure : The circuit structure of diy particle counter circuit panel parts ensures stability and reliability, resulting in an extremely low failure rate. It meets the daily requirements perfectly.
particle Tube Model: M4011
Type C interface tápegység: 5V1A
Power consumption current: 20mA
Tube M4011 Specifications:
Diameter: 10±0.5mm
Total length: 90±2mm
Starting voltage: Less than 350V
Recommended working voltage: 380V
Minimum ping length: 80V
Maximum ping slope: 10%/80V
Extreme working voltage: 550V
Maximum background countrate: 25 counts/minute
Lifespan: Greater than 1x109 waveform
Detection:X-ray Beta Gamma rays
Colour:Photo Color
Material:plastic
Package Contents:
1 x ionizing particle Detector panel Set (DIY Version)
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
    |